Click on the image to check the artwork
By certification 
1.Features of rtv liquid moulding silicone rubber
RTV liquid moulding silicone rubber has the following features
a. low viscosity, exceptional fluidity and easy operation : 21000 cps suitable for pouring
b. resistance to deformation, high-temperature 220 degree centigrade
c. acid, alkali and ageing-resistance
d. low shrinkage< 0.2%
e. good tensile strength 36±2 (kgf/cm)
f. high reproduction times
2. rtv liquid moulding silicone rubber data sheet
Model Appearance Viscosity(cs) Hardness(A°) Tensile Strength(kgf/cm) Tear Strength(KN/cm) Elongation(%) Mixing Ratio(%) Operating Time(H/250C) Curing Time(H/250C)
HY 625 white 20000±1000 25±2 36±2 22±2 500 2~3 0.5 4~6
HY 638 white 23000±2000 34±2 49±2 23±2 470 2~3 0.5 4~6
3. Operation tips of rtv liquid moulding silicone rubber
a. adding too much silicone oil will destroy the molecular of silicone rubber, which will cause a decrease of the tensile and tear strength of the mold and deformation may occur.
b. remember to take the proper silicone rubber to make the mold for suitable products. for products with delicate and complicated patterns, you are expected to use soft silicone to make molds. While for products with easy and smooth patterns, you should choose hard silicone rubber.
RTV liquid moulding silicone rubber has the following features
a. low viscosity, exceptional fluidity and easy operation : 21000 cps suitable for pouring
b. resistance to deformation, high-temperature 220 degree centigrade
c. acid, alkali and ageing-resistance
d. low shrinkage< 0.2%
e. good tensile strength 36±2 (kgf/cm)
f. high reproduction times
2. rtv liquid moulding silicone rubber data sheet
Model Appearance Viscosity(cs) Hardness(A°) Tensile Strength(kgf/cm) Tear Strength(KN/cm) Elongation(%) Mixing Ratio(%) Operating Time(H/250C) Curing Time(H/250C)
HY 625 white 20000±1000 25±2 36±2 22±2 500 2~3 0.5 4~6
HY 638 white 23000±2000 34±2 49±2 23±2 470 2~3 0.5 4~6
3. Operation tips of rtv liquid moulding silicone rubber
a. adding too much silicone oil will destroy the molecular of silicone rubber, which will cause a decrease of the tensile and tear strength of the mold and deformation may occur.
b. remember to take the proper silicone rubber to make the mold for suitable products. for products with delicate and complicated patterns, you are expected to use soft silicone to make molds. While for products with easy and smooth patterns, you should choose hard silicone rubber.
